2022 September 4th Week KYOCM News Recommendation - Useful knowledge about spherical roller bearing

Mainly applicable cage: 

Stamped steel plate reinforced cage (suffix E). Stamped steel cage (suffix CC), glass fiber reinforced polyamide 66 cage (suffix TVPB), machined brass two-piece cage (suffix MB). Machined brass integral cage (suffix CA), stamped steel cage for vibration applications (suffix JPA). Brass cage (suffix EMA) for vibration applications.


Applications: 

Papermaking machinery, reduction gears, railway vehicle axles, rolling mill gearbox bearing housings, rolling mill rolls, crushers, vibrating screens, printing machinery, bar machinery, various industrial reducers, vertical self-aligning bearings with seats.


spherical roller bearing


Installation:

Spherical roller bearings are equipped with drum-shaped roller bearings between the inner ring with two raceways and the outer ring with spherical raceways. The center of curvature of the outer ring raceway surface is consistent with the center of the bearing, so it has the same self-aligning function as the self-aligning ball bearing. When the shaft and housing are deflected, the load can be automatically adjusted and the axial load in two directions. Large radial load capacity, suitable for heavy loads and shock loads. The inner diameter of the inner ring is a bearing with a tapered hole, which can be directly installed. Or install it on the cylindrical shaft using an adapter sleeve and a dismantling sleeve.
The cages use steel stamping cages, polyamide forming cages and copper alloy turning cages. For self-aligning bearings, use an intermediate mounting ring to prevent the outer ring from tilting and rotating when installing the bearing with a shaft into the shaft hole of the case. It should be remembered that some sizes of self-aligning ball bearings have balls that protrude from the sides of the bearing, so the middle mounting ring should be recessed to prevent damage to the balls. A large number of bearings are generally installed mechanically or hydraulically.
For separable bearings, the inner ring and outer ring can be installed separately, which simplifies the installation process, especially when the inner and outer rings need an interference fit. When installing the shaft with the inner ring in place into the bearing housing including the outer ring, you must pay attention to check whether the inner and outer rings are correctly aligned to avoid scratching the bearing raceway and rolling parts. If cylindrical and needle roller bearings use inner rings without flange rib or inner ring with flange on one side, it is recommended to use a mounting sleeve. The outer diameter of the sleeve should be equal to the inner ring raceway diameter F, and the machining tolerance standard should be d10. Drawn cup needle roller bearings are best mounted with mandrels.

(http://www.sinake.de/)

 

More About KYOCM:

Located in industrial area of the Zhaozhuang Industry Park in Linqing, Shandong, Kaiyou Bearings Co., Ltd. is a professional bearing manufacturer and exporter with nearly 20-year experience. The products have reached the international advanced level with advanced production technology and modernized measuring management. Products are widely used in electrical and mechanical trades, the farm machinery industry, the automobile industry and all kinds of transmission facility manufacturing extensively. The products have a good sale in domestic and international dozens of country or region. Companies with the “integrity-based, quality firs” as the operational concept.

 

2022 New Week Hot Products Recommended:

Cylindrical Roller Bearing:

KYOCM cylindrical roller bearings can meet the challenges of applications faced with heavy radial loads and high speeds. Accommodating axial displacement (except for bearings with flanges on both the inner and outer rings), they offer high stiffness, low friction and long service life. KYOCM cylindrical roller bearings include single row cylindrical roller bearings, double row cylindrical roller bearings and four row cylindrical roller bearings.

 

Cylindrical roller bearings are also available in sealed or split designs. In sealed bearings, the rollers are protected from contaminants, water and dust, while providing lubricant retention and contaminant exclusion. This provides lower friction and longer service life. Split bearings are intended primarily for bearing arrangements which are difficult to access, such as crank shafts, where they simplify maintenance and replacements. 


Cylindrical Roller Bearing 

 

For dimensions and specifications, contact us now:

Add: No.57 Youzhuang Commerial Street Zhaozhuang industry Garden Linqing City Shandong China

Tel: 0086-635-2632030

Fax: 0086-635-2632918

Email: yobearing@hotmail.com

Web: www.kyocm.com

 


2022-09-19

Contact